You are here: Home » Products » Solar Controller » MPPT Solar Controller » MPPT controller for Intelligent generator display LCD Charge Controller tracking efficiency can reach 99.9% Full load
Share to:

MPPT controller for Intelligent generator display LCD Charge Controller tracking efficiency can reach 99.9% Full load

-- Applied to dual battery system, Lithium lead-acid battery used at the same time.
-- The PV/generator charges the backup battery separately.
-- The PV and generator charge the backup battery simultaneously.
-- PV to charge the starter battery.
-- Supports multiple generator types such as smart generators (Euro VI) and traditional generators.
-- Loss compensation/temperature compensation for backup battery charging voltage line.
-- High temperature charging automatic derating / low temperature prohibit charging.
  • NVMA SERIES
  • NOVA
Availability:
Quantity:

NVMA Series DC/DC&MPPT solar charging controller is based on multi-phase synchronous rectifier technology and advanced MPPT control algorithm, adopting all-digital intelligent design, which has fast response speed, high reliability and high industrialized standard. Polyphase synchronous rectifier technology can ensure high conversion efficiency under any charging power, and greatly improve the energy utilization of the system; the industry-leading PowerCatcher MPPT technology realizes the maximum energy tracking of solar panels, so that it can quickly and accurately track the maximum power point of solar panels in any environment and obtain the maximum energy of solar panels in real time.



This Product is a DC/DC intelligent charger for vehicle or ship system. Applied in the dual-battery system, the system integrates the respective merits of generator's power generation and photovoltaic power generation, and a variety of charging methods are ingeniously designed and combined to effectively ensure that the power lof the dual-battery system is sufficient al the time. Solar energy and generator can charge the backup battery simultaneously, and can charge the backup battery independently. In addition, solar energy can charge the starting battery under specific conditions.

场景5



Product Parameters



Product Type NV-MA2430N15 NV-MA2440N15 NV-MA2460N15 NV-MA4830N15
Static power consumption ≤30mA ≤40mA ≤50mA ≤50mA
Battery type USE/FLD/GEL/LI/SLD(Default)
System Voltage 12V/24V 12V/24V/36V/48V
Battery's operating voltage range 8V-32V 8V-64V
Rated Charging Current 30A 40A 60A 30A
MaximumPVInputCurrent 27A 35A 53A 27A




400W/12V
Maximum solar panel power 400W/12V 520W/12V 800W/12V 800W/24V

800W/24V 1040W/24V 1600W/24V 1200W/36V




1600W/48V
Maximum PV Open-circuit Voltage 150V

MPPT Operating Voltage Point
Range
(Battery Voltage +2)~110V

MPPT Efficiency >99%

Charging Conversion Efficiency 85%-98%(10%~100% of rated power)

Rated load current 30A 40A 40A 30A
Load operation mode Pure light-dependent control, light and time-dependent control, manual mode (default),
debugging mode, normally opened.
Parallel connection for charging × ×
Line loss compensation × ×
Charging cut-off current setting
Constant voltage output setting
Charging temperature
compensation of lead-acid battery
Temperature protection
Overload/short-circuit protection
Load pre-start
TTL Communication Baud Rate 9600kps
RS485 Communication One isolated RS485 communication port, with power output of 5V200mA, baud rate of 9,600kps by default and adjustable. 2 isolated RS485 communication ports,
supporting parallel use, with power output of
5V200mA, baud rate of 9,600kps by default
and adjustable.
CAN communication Optional (RV-C Protocol)
Historical Data Can store historical data of the past 300 days
Backlight function Light up if the key is pressed down, and automatically turn off in 20s if there is no key action

PV Overvoltage Protection, PV Reverse Connection Protection, PV Short-Circuit Protection,
Nighttime Reverse Charge Protection, Input Limited Power Protection, Overtemperature
Protection function Protection, Load Short-Circuit Protection, Load Overload Protection, Battery Supervoltage

/Over-discharge Protection, Battery Reverse Connection Protection and Battery Terminal
Short-Circuit Protection.
Grounding Type Co-negative design and negative grounding
Operating ambient temperature
range
-35℃~ 65℃ (no derating within 45℃ if well ventilated)
Protection Grades IP32
Cooling mode Natural Cooling
Size 260*216*83.2mm 260*216*98.5mm
Weight 2.3kg 3.4kg 3.6kg

场景1

Product Characteristics

◆Using MPPT technology, the tracking efficiency of MPPT can reach 99.9%.
◆Support CAN communication function (optional).
◆Supports a wide variety of batteries such as SLA、GEL、FLD、Li、 user-defined.
◆Support line loss compensation of charging voltage, so that the battery charging
voltage control is more accurate (partial models).
◆Support starting capacitive load and inductive load.
◆RS485 communication supporting standard Modbus protocol, with baud rate adjustable.
◆Support TTL communication of standard Modbus protocol, with baud rate fixed.
◆With perfect charging and discharging protection mechanism such as supervoltage,
overcurrent, overload, overtemperature and short-circuiting.
◆ Using high-quality aluminum radiator and high-temperature derating processing
can ensure reliable and efficient operation in each work environment.


场景8

Previous: 
Next: 

RELATED PRODUCTS

WENZHOU NOVA NEW ENERGY CO., LTD, located in Wenzhou City, is a high-tech enterprise specialized in the R&D, manufacturing and marketing of Solar and Smart Home products since 2008.
CONTACT US
Copyright 2022 © Wenzhou Nova New Energy Co., Ltd. All rights reserved. Sitemap | Support By Leadong